|
IJ Corrosion-resistant & heat-resistant alkali pump
Product description:
IJ single-stage single-suction cantilever centrifugal pump chemical pump IH series is based on the reference to the latest foreign technology combined with the actual usage of new products and optimize the design of its rated performance and mounting dimensions conform to ISO2858 standard manufacturing conditions compliance with ISO5199 standards, mainly for transporting slurry containing crystalline impurities and chemical processes in medium containing less than 50% solid content within.
Flow rate: 30 to 1200
Head: 8 ~ 80
Speed: 1450 to 2900
Compared with the IH pump, IJ chemical pump structure has the following features;
A shortened boom impeller, shaft diameter bold;
2, asymmetric spiral cross-section of the pump casing no mouth ring;
3, using three bearings;
4, equipped with advanced dual mechanical seal or packing seal similar to the new seal.
Due to the above structure so that the pump has the following advantages:
1, can transfer high viscosity or solid medium, then the pump higher efficiency than IH pump;
2, asymmetric spiral cross-section reduces the impact of the loss of fluids, reducing the size of the pump housing;
3, increasing the strength of the shaft, reducing the deflection of the rotor, and therefore stable, long seal life;
4, the impeller nut and impeller made whole, improved pump inlet conditions, improve pump cavitation resistance;
5, an advanced form of the seal, the seal better, reducing the leakage of the pump;
6, the gap can be adjusted without removing the case of the pump impeller and the pump housing, reducing maintenance time and maintenance cost savings.
IJ single-stage single-suction cantilever centrifugal pump chemical pump IH series is based on the reference to the latest foreign technology combined with the actual usage of new products and optimize the design of its rated performance and mounting dimensions conform to ISO2858 standard manufacturing conditions compliance with ISO5199 standards, mainly for transporting slurry containing crystalline impurities and chemical processes in medium containing less than 50% solid content within.
Flow rate: 30 to 1200
Head: 8 ~ 80
Speed: 1450 to 2900
Compared with the IH pump, IJ chemical pump structure has the following features;
A shortened boom impeller, shaft diameter bold;
2, asymmetric spiral cross-section of the pump casing no mouth ring;
3, using three bearings;
4, equipped with advanced dual mechanical seal or packing seal similar to the new seal.
Due to the above structure so that the pump has the following advantages:
1, can transfer high viscosity or solid medium, then the pump higher efficiency than IH pump;
2, asymmetric spiral cross-section reduces the impact of the loss of fluids, reducing the size of the pump housing;
3, increasing the strength of the shaft, reducing the deflection of the rotor, and therefore stable, long seal life;
4, the impeller nut and impeller made whole, improved pump inlet conditions, improve pump cavitation resistance;
5, an advanced form of the seal, the seal better, reducing the leakage of the pump;
6, the gap can be adjusted without removing the case of the pump impeller and the pump housing, reducing maintenance time and maintenance cost savings.
Address: Jiangsu Jingjiang Xinqiao Town Road No. 98
Contact person: Yang Quanbing
Tel: +86-523-84324639
Mobile: +86-13505120035
Fax: +86-523-84310552
E-mail: 234616097@qq.com
URL: www.yxpump.cn
Contact person: Yang Quanbing
Tel: +86-523-84324639
Mobile: +86-13505120035
Fax: +86-523-84310552
E-mail: 234616097@qq.com
URL: www.yxpump.cn
